John Kinross of Kinross and Tarbolton, 1898. 2-storey and basement, 3-bay, Scottish 17th century villa, sited on steeply falling ground with 1st floor breaking eaves in gabled dormerheads and with single storey and part basement steeply pitched service block to NE. Rake-jointed rubble sandstone with ashlar dressings. Roll-moulded surrounds to windows, stop-chamfered at cills; generously proportioned at ground and the S elevation. Principal gables crowstepped with beak skewputts.
N ELEVATION: recessed gabled bay to left, 2 bays to right. Door at centre with roll-moulded surround and blank heraldic panel above; further, secondary door formed from window on return to left apparently soon after completion; broad window flanking to right and 1st floor windows breaking eaves. Recessed bay with pedimented window at ground; blank panel to gablehead and stack by re-entrant angle. Blank gable of single storey service block to outer right.
S ELEVATION: 3-bay. Full-height advanced bay to right, corbelled to square in gablehead at 1st floor and chamfered to left; French windows to basement with carved keystone; heraldic panel above broad, corniced window to principal floor, flanked by window on splay to left; 1st floor window in gablehead. Centre bay with later, decorative wrought-iron forestair leading to window of principal floor altered to French window; blank panel above 1st floor window. basement window, and larger ground floor window in bay to left in advanced panel with ashlar pentice roof. W ELEVATION: 3-bay, M-gabled bridged at centre with ashlar gablet coping. Gable of service block to outer left, single storey with basement on falling ground; oculus at 1st floor to main gable above. Window to each floor at centre, largest to principal floor. 1st floor window in corbelled ashlar panel to outer right gablehead.
E ELEVATION: paired windows to basement and 3 gabled dormerhead windows at 1st floor to centre and to right with ashlar thistle and fleur-de-lys finials. Small-pane and multi-pane glazing patterns in generous sash and case windows. Westmoreland slates; ashlar ridge tiles. Moulded coping to gablehead and wallhead stacks. Gabled attic dormer with barge boards to N pitch, visible to W.
INTERIOR: fine original decoration retained, joinery work by Scott Morton and Co, cabinetmakers; decorative plasterwork cornices and ceiling details; built-in cupboards and display cabinets including shell-headed niches; well-crafted oak dressers to pantry. Alteration to 1st floor on subdivision reversed when property reunited as one. BOUNDARY WALLS STEPS GATES GATEPIERS & RAILINGS: all original. Saddleback ashlar coping to coursed sandstone rubble boundary walls, 16" in diameter; panelled dies with moulded coping and ball finials; ashlar steps to side elevations. Panelled ashlar corniced piers to railings and gates to entrance elevation; decorative wrought-iron railings by Thomas Hadden.
We list buildings of special architectural or historic interest and these are selected according to criteria published in the www.historic-scotland.gov.uk/shep-dec2011.pdf, Annex 2, pp74-76.
The information in the listed building record gives an indication of the special architectural or historic interest of the listed building(s). It is not a definitive historical account or a complete description of the building(s). The format of the listed building record has changed over time. Earlier records may be brief and some information will not have been recorded.
Enquiries relating to works to listed buildings should be made to the local authority in the first instance. Listed building consent is required for works which a local authority considers will affect its character as a building of special architectural or historic interest and local authorities also decide if listed building consent is required.
Listing covers both the exterior and the interior. Listing can cover structures not mentioned which are part of the curtilage of the building, such as boundary walls, gates, gatepiers, ancillary buildings etc. The local authority is responsible for advising on what is covered by the listing including the curtilage of a listed building. For information about curtilage see www.historic-scotland.gov.uk.
Legislation introduced on 1 October 2015 allows us to state that: an object or structure fixed to the listed building; any object or structure within the curtilage of the listed building; and, any part or feature of the listed building that is not of architectural or historic interest may be excluded from a listing. If part of your building is not listed under the new legislation, the part will be excluded in the statutory address and in the statement of special interest. The statement will use the word 'excluding' and quote the relevant section of the Historic Environment Scotland Act 2014. Some earlier listed building records may use the word 'excluding', but if the Act is not quoted, the record has not been revised to reflect current legislation.
Find out more about listing and our other designations at www.historic-scotland.gov.uk.